iPhone 6 Screen Assembly Replacement
All you need to do is remove the old display assembly and transfer the home button to the new display assembly With Every Parts On Old Our iPhone 6 Screen it's important to transfer the original home button onto the new display in order for Touch ID (fingerprint scanning) to function.
if You Want Us To Fix You iPhone 6 Screen Replacement Then Visit ISYSTEMREPAIRS
Tool Need To Perform The iPhone 6 Screen Replacement
1 New iPhone 6 Screen (For New Display)
2 tweezers (For Tweezers)
3 P2 pentalobe Screw Driver ( For P2 pentalobe Screw Driver)
4 Star Phillips Screwdriver (For Star Screw Driver)
5 Suction Cup (For Suction Cup)
6 Spudger (For Spudger)
7 Opener ( For Opener)
Step 1:Turn Your iPhone Off before You Perform iPhone 6 Screen Replacement
Step 2: Remove The Botton Two Screw Of Your iPhone 6 With The Help Of P2 pentalobe Screw
Driver
Step 3: use Suction cup Near Left Corner of the Display
Step 4: Pull up The Suction Cup with Your Finger Upwards and Create a gap Between Screen And Rear Case
NOTE: Take Your time And Remove the Display Because Display and Rear Case Will held with adhesive.
Step 5: after you See gap between display and rear Case use Spudger between the display and Rear case and the rest of the side
Step 6: after You Open you Display From Your Rear case then Remove Battery Connector Sheld With Star Screwdriver
Step 7: Remove battery Connecter from Logic Board with the Help of Spudger
Step 8: Remove the Screen Assembly Shield in Logic Board With Star Screw Driver
Note: this is a different model but in iPhone 6s screen shield you will get Four Star Screws
Step 9: Remove the Display Shield
Step 10: Discount the Screen Cable From Logic Board
Step 11: Remove Home Button Assembly with the Help of Star Screw Driver There will be three Screw in the home button section
Then Fix All The Parts To Your New iPhone 6s Screen And Reassamble it
See Below Video Tutorial









Comments